Simon Bryan wrote: > ... >>That would tend to indicate that there is no setting for those cards >>in /etc/modules.conf. What does that look like? > > seems OK > alias eth0 e1000 > alias eth1 e1000 Looks fine. > ... > This is from the /var/log/messages file after an attempt at a manual restart: > > Mar 1 12:06:17 voyager kernel: Intel(R) PRO/1000 Network Driver - version > 5.2.30.1 > Mar 1 12:06:17 voyager kernel: Copyright (c) 1999-2004 Intel Corporation. > Mar 1 12:06:17 voyager kernel: PCI: Found IRQ 11 for device 01:05.0 > Mar 1 12:06:17 voyager kernel: The EEPROM Checksum Is Not Valid That looks like your problem - the driver is refusing to load because the EEPROM checksum is invalid. Have you flashed the BIOS/firmware on these cards at some time? If not, you may want to see if it is possible to do so by downloading a boot floppy from Intel or your server manufacturer (try the latter first). More than likely the Windows drivers work because they don't check the checksum, or just treat it as a warning. -- Paul Gear, Manager IT Operations Redlands College, 38 Anson Road, Wellington Point 4160, Australia (Please send attachments in portable formats such as PDF, HTML, or OpenOffice.) -- The information contained in this message is copyright by Redlands College. Any use for direct sales or marketing purposes is expressly forbidden. This message does not represent the views of Redlands College.
Attachment:
pgp00001.pgp
Description: PGP signature